[TESTING]
None

Application of Laser Welding Technology

Forum > General C:F Forum > Challenge:Future Discussions

Application of Laser Welding Technology

michale scot

Visitor

michale scot

Laser welding is a kind of high precision, high efficiency and new melting welding method with high energy density green laser beam as heat source and instantaneous melting of local material to form welded joint. Compared with the general welding technology, laser welding technology of high energy density, can penetrate a thick workpiece without groove, not only a substantial increase in the production of welding speed, high welding quality can also get high strength, small deformation, thereby significantly reducing the cost.

https://www.htpow.com/300mw-gr een-high-power-laser-pointer-w aterproof-adjustable-holster-p -1038.html

At present, laser welding machine, butt welding welding has been widely used in shipbuilding, several shipyards used this kind of welding machine. Laser welding of large ship plate production line, generally need to be equipped with: profile machining and finishing equipment, including chamfer rolling machine, sandblasting machine, continuous inkjet marking machine, plasma cutting equipment, transmission system, rolling platform, warehouse etc.; laser operating system, including red laser pointer source, mirror optical system, a numerical control table, control system and detection system; bracket system, including cutting bench, welding bench, lifting device, fixture etc.. Laser welding plate can greatly shorten the production time. In the traditional shipbuilding method, shape and position tolerances must be manually eliminated by laser welding of ship hull structure, with the good, can quickly form the profile, 12m plate length tolerance within 0.5mm, almost do not need to repeat the process, save a lot of people.

https://www.htpow.com/highqual ity-500mw-burning-waterproof-r ed-laser-pointer-p-1067.html

The laser welding will have a major impact on the following aspects of ship design, construction and service life: because no longer limited to the profile type, performance is a major consideration, optimize the design structure of the target; the 3D complex builder component according to its shape into a two-dimensional component is relatively simple, with high the laser power faster and more accurately welded together, thereby reducing the cost of construction, reduce the workload of finishing, and reduce the weight of that type; users can reduce operating costs by welding greatly; the fatigue life due to the machining accuracy, reduce welding seam and prolong the ship internal space according to the need, easy weapon the equipment re deployment, fuel consumption reduction.

Since the steel was used in shipbuilding, people have been using arc welded skeleton stiffening plates as deck and bulkhead partitions to improve the structural efficiency of steel plates. The blue laser pointer welding of corrugated sandwich metal plate used in ship performance was studied in detail, including the small scale model test, fire prevention, noise and corrosion test, bending strength, compressive strength, shear strength and fatigue performance test, and the application test. The test results show that the sandwich plate can greatly reduce the weight of the structure, improve the deck or cabin partition refractory, insulation performance and smoothness, easy to apply paint and coatings; and can reduce the lifetime maintenance costs, increase the cabin space available.

https://www.htpow.com/high-pow ered-30000mw-blue-laserpointer -445nm-worlds-brightest-p-1027 .html

Twist and installation error of large components can use advanced computer aided design, manufacturing technology and precision cutting technology are overcome, but even so, the arc welding process of single parts welded together, to use a large amount of weld metal, weld metal solidification charge shrink greatly the residual stress will lead to deformation. The laser welding technology has the advantages of narrow welding seam, fast welding speed, small amount of filling or no filling of weld metal, and small residual stress and deformation.

Laser processing technology is the use of the characteristics of laser beam interaction with the material of materials (including metal and nonmetal) for cutting, welding, surface treatment, punching, micro machining and as a light source, an object recognition technology and application field of traditional laser processing technology is the biggest. The laser pointer cutting PCB/FPC, without as needed for several traditional stamping mould, save time and cost; and laser cutting is a non-contact processing, eliminates the damage mechanical stamping components contact processing, greatly improving the rate of finished products, using PCB/FPC laser cutting is the inevitable trend of development.

6th November, 2017 @ 11:49 AM CEST

Please log in or register to post a reply.

AddThis
Bookmark and Share
global youth think tank & student competition